Let’s say you’re going to print in a standing 90 degree angle. If you don’t use the support the filament will be extruded in the air. When the overhang is too much you need to use the support material. In such cases, you can select this setting in your Panobuilder software.

We recommend that you use a raft when you make your 3D model.

Before the actual print starts, the printer built a bottom plate to support your model. This will make the model more stable and it also helps with the distance.

It depends on the temperature in the room and on the structure of the model. Panospace filament works best in 195-225 degrees but sometimes you have to adjust the temperature on the model to get the best result.

Recommended printing temperature is 215-225 degrees Celsius.

The file names on the touch screen can fit 7 characters.

60 drawings.

find3d.com is a search engine for 3D models. There are several good communities where you can find plenty of 3D models as well.

STL, 3mf, PLY and GCO.